Products tagged with 'Ballasts & Power Supply'
LightEnerG™ Premium Switchable Ballast Kits
P_00315
- Can easily switch between MH and HPS bulbs by flipping a specialized switch.
- Also switchable between 120 V and 240 V.
- Use provided 120 V cord or 240 V cord (sold separately).
- No additional wiring is necessary.
- The aluminum housing dissipates heat and keeps components cool.
- Includes a top-of-the-line Aerovox® capacitor.
- Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
LightEnerG™ Premium Ballast Kits
P_00313
- Magnetic ballast capable of switching between 120 V and 240 V.
- Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
- No additional wiring is necessary.
- Can also be used with 600 W MH conversion lamps.
- Aluminum housing is specially designed to dissipate heat and keep components cool.
- Includes a top-of-the-line Aerovox® capacitor.
- Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
LightEnerG™ Bare Ballasts
P_00299
- UL certified ballast units.
- North American made capacitor.
- Quad-tap (120 V, 208 V, 240 V, and 277 V).
- Must be assembled by a qualified electrician.
LightEnerG™ The ACE™ Electronic Digital Ballasts
P_00488
- State-of-the-art, UL-approved electronic ballasts.
- Compatible with both MH and HPS bulbs.
- Features a dimmable switch with the ability to adjust watt output for three different settings.
- Has carefully arranged circuit boards and stainless steel ball bearing fans.
- Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
- Generator-ready with the most stable output frequency of any comparable ballast.
- Results in lower power loss and better overall power management.
- Has a power factor of 99.9% for 100% of the time.
- Far more efficient than older core and coil ballasts.
LightEnerG Premium MH / HPS Switchable Quad Tap Ballast Kit (1,000 W)
Q100931
- 1,000 watt magnetic ballast.
- Can easily switch between MH and HPS bulbs by flipping a specialized switch.
- Can also be switched between four primary input voltages: 120 V, 208 V, 240 V or 277 V.
- The aluminum housing is specially designed to dissipate heat and keep components cool.
- Top of the line Aerovox® capacitor is also included.
- Use the 120 V or 240 V power cord (sold separately) to change between these two voltages.
- If 208 V or 277 V operation is required the wiring must be changed by a certified electrician.
- The lamp cord receptacle accepts all LightEnerG™ lamp cords and reflectors.
- UL approved.
