Netafim

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 or 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 18, 30, 36, or 48 in (46, 76, 91, or 122 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.

• Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
• Techlock threaded caps and compression rings ensure a tight seal
• Operating pressure range: 0 to 100 psi

• Multi-Outlet Dripper (MOD) supports multiple drip stake assemblies from a single drip emitter.
• Preassembled with a two-way flat manifold, two 36 - or 48-inch UV Polyethylene Tubing leads, and two 6 3/8-inch standard Angle Arrow Drippers.
• Compatible with the Netafim 1 GPH (Q112854) or 2 GPH (Q102461) Techflow Emitters.

• The toughest thinwall dripline ever made.
• Ribs outside the pipe minimize the dripline abrasion during installation.
• Ribs inside the pipe protect the dripper from damage even in very harsh installations.
• Seamless construction is stronger and more durable than comparable drip tape.
• Flap outlet protection impedes soil ingestion and root intrusion.
• Seasonal or multi-seasonal use, surface or shallow burial (up to 8 in).

• The toughest thinwall dripline ever made.
• Ribs outside the pipe minimize the dripline abrasion during installation.
• Ribs inside the pipe protect the dripper from damage even in very harsh installations.
• Seamless construction is stronger and more durable than comparable drip tape.
• Flap outlet protection impedes soil ingestion and root intrusion.
• Seasonal or multi-seasonal use, surface or shallow burial (up to 8 in).

• Netafim 630 Series thinwall (TWD) coupling valve.
• Provides precise manual control over a section of your irrigation system.
• Designed for easy installation and a leak-free connection.
• 50 per bag.

• Netafim 630 Series thinwall (TWD) to valve to 400 barb connector.
• Provides precise manual control over a section of your irrigation system.
• Designed for easy installation and a leak-free connection.
• 50 per bag.

• Unique design regulates flow and provides continuous self-cleaning action.
• Features a 2.2 PSI internal check valve that prevents low emitter drainage, holding back up to a 5-foot column of water.
• Anti-siphon operation prevents contaminants from entering the emitter.
• Pressure compensating, ensuring consistent flow from 14.5 to 58 PSI.
• Recommended minimum filtration of 120 mesh.
• Compatible with 36" or 48" 2-way (#Q102463 / #Q102464) or 4-way (#Q112852 / #Q112853) Dripper Stake Assemblies.

• The only 1-inch regulator in the industry rated from 0.5 to 35 GPM.
• Constructed with high-strength ABS and stainless steel springs for long-lasting durability.
• Features a rolling diaphragm and sealed regulating chamber for consistent performance.
• Suitable for various applications in any irrigation system.
• Operating inlet pressure range: 30 to 150 PSI.

• 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
• Reduces the risk of contaminants being drawn into the emitter.
• Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
• Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
• Sharp barb allows for easy installation with no tools required.

• Instantly responds to pressure variations to maintain a constant 35 PSI outlet pressure.
• Non-corrosive, high-quality plastic bodies withstand commonly used fertilizers and chemicals.
• Sealed regulating unit with a stainless steel spring and screw for easy maintenance and replacement.
• Maximum Operating Pressure: 145 PSI.

• Reduces setup time considerably.
• Available in 36-inch or 48-inch assemblies for flexible installation.
• Includes a 3.2 or 6.6 GPH pressure-compensating emitter with CNL check valve.
• Comes with 36 or 48 inches of Super Flex Tubing.
• Minimum operating pressure: 22 PSI.
• 3.2 GPH assemblies pair with Netafim single pattern standard spray stakes (#Q102455).
• 6.6 GPH assemblies pair with Netafim single pattern (#Q102456) or double pattern (#Q102457) standard spray stakes.

• Netafim™ 17 mm Shut-Off Valve
  • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
  • Can be used as a flush valve or to shut off a table.
• Netafim™ 17 mm Techline Combination Tee
  • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
  • Connects to 1/2 inch female pipe thread.
  • Use with the Netafim Liquid Filled Pressure Gauge (#Q102475) to measure water pressure on the table.

• Provide consistent water distribution across the entire system.
• Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
• Single-sided spray stake is ideal for placement near the edge of the pot.
• Alternative option includes Netafim's 'bow-tie' double-spray pattern for different watering needs.
• Pair with the Netafim 36 inch (#Q102480) or 48 in (#Q102479) single spray stake assembly.

• Equipped with a barbed outlet and CNL check valve to prevent low emitter drainage.
• Anti-siphon operation keeps contaminants from entering the emitter.
• Pressure compensating design ensures consistent flow from 12 - 58 PSI.
• Compatible with Netafim Super Flex UV White PE Tubing (#Q100705).

• CNL Junior PC drip emitters.
• 2-litre-per-hour drippers.
• 24 inch (68.6 centimeter) Superflex white PE tubes.
• 45° angle spikes.

• The toughest thinwall dripline ever made.
• Ribs outside the pipe minimize the dripline abrasion during installation.
• Ribs inside the pipe protect the dripper from damage even in very harsh installations.
• Seamless construction is stronger and more durable than comparable drip tape.
• Flap outlet protection impedes soil ingestion and root intrusion.
• Seasonal or multi-seasonal use, surface or shallow burial.

• Direct connection from thinwall (TWD) to thinwall (TWD).
• Extremely reliable connector (fastened by a nut).
• Easily released from the pipe when required.
• Good resistance to mechanical pull.
• Easy to connect both ends of the pipe in sub-surface application thanks to the connector's long body (in SDI application when a dripline happens to crack/blow up needing cut off and repair).
• Leak-proof connections.
• 50 per bag.

SPECIAL ORDER

• CNL Junior PC drip emitter.
• 2-litre-per-hour dripper.
• 24 inch (68.6 centimeter) Superflex white PE tube.
• 45° angle spike