LightEnerG

• Extremely efficient low-heat horticultural lighting systems.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Available in a variety of sizes.

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 46.2 x 34 x 2.95 in (117 x 86 x 7.5 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 9 in x 3 in (60 x 23 x 7.6 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 14.5 in x 3 in (60 x 37 x 7.6 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 25.5 in x 3 in (60 x 65 x 7.6 cm).

• Designed to be used with LightEnerG Pro Light T5 HO Kits.
• Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
• Can be used to add extra light during the fruiting and flowering stage.

• Designed to be used with LightEnerG Pro Light T5 HO Kits.
• Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
• Can be used to add extra light during the fruiting and flowering stage.

• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• 1,000 watt magnetic ballast.
• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

Replacement fuses for The ACE™ Digital Ballast.

15 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

10 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

6.3 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

• State-of-the-art, UL-approved electronic ballasts.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 1,000 W.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 400 W.

• High quality plugs securely connect to any IEC14 ballast.
• Male 120 V or 240 V plugs.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• High quality plugs securely connect to any IEC14 ballast.
• Male 120 V plug.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• High quality plugs securely connect to any IEC14 ballast.
• Male 240 V plug.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 3 feet (1 meter).

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Voltage: 600 V.
• Available in a range of sizes.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 25 foot (7.6 meters).
• Voltage: 600 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 16/3.
• Length: 15 foot (4.5 meters).
• Voltage: 600 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 16/3.
• Length: 25 foot (7.6 meters).
• Voltage: 600 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 6 foot (1.8 meters).
• Voltage: 300 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.