Products tagged with 'Temperature & Humidity'

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Ideal-Air™ Pro Series 180 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 180 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 180 pints (86°F, 80% RH); Power: 12.31 Amps/1350 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

• Smart sensors designed to accurately give climate condition updates to maintain the ideal environment.
• Connect to AC Infinity's app via Bluetooth to access remote temperature and humidity monitoring and alarms.
• Backlit LCD screen with desktop, wall, or magnetic mounting options to place and display anywhere.
• Fit for use in many home and grow settings like greenhouses, grow tents, guitar rooms, and basements.
• CLOUDCOM B1: Corded probe provides fast-refresh climate readings and daily highs and lows of spot, remote locations.
• CLOUDCOM B2: Built-in sensor provides fast-refresh readings of temperature and humidity conditions and daily highs and lows.

• A heating mat designed to accelerate and improve the success of seed starting and germination.
• Features an innovative far-infrared film that warms up faster, and distributes soft heat more evenly.
• Crafted with IP-67 quad-layer PVC that’s flexible, resistant to wear-and-tear, and easy to wipe clean.
• Verifiable UL (E518635) & MET (E115128) certifications for electrical safety thru online directories.
• 80 - 87°F (27 - 30°C) heating range.
• Warms up to 20°F above ambient temp.
• Includes nylon bag.

• Quiet fan systems designed for cooling receivers, amplifiers, DVRs, and other AV components.
• Protects components from overheating, performance issues, and shortened lifespans.
• Contain dual-ball bearing blowers with PWM-controlled motors to minimize noise.
• T-Series: LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
• S-Series: Programming features two thermal trigger modes and four speed control options.