CO2 Management

The Eos® Complete Digital Humidity Controller allows you to accurately and efficiently control the humidity levels in your garden. Set your desired humidity level and the controller will activate and deactivate humidifying and dehumidifying equipment appropriately. This controller also features low temperature protection in the event that achieving the desired humidity level results in an undesirable temperature. This Eos® unit features a 15 ft remote sensor that monitors your temperature and humidity levels. The easy-to-use analog style interface makes programming the controller a simple task. Day and night settings allow for accurate environmental control.

The Eos® 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos® 2 utilizes a high-quality humidity sensor as well as a photocell for day and night control. Settings are easily programmed with the knob that doubles as a button to change settings. A slide switch controls whether the controller is running in Day, Night or 24 hr mode. 10 Amps/ 120 V/ 60 Hz.

Controller turns off your lights if high temperature exceeds set point. Built-in 1 to 30 min hot start delay with HOLD feature. 6 foot temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

This controller will allow you to precisely monitor and control the environment in your grow room. Featuring an easy-to-use analog interface this digital controller is easy to program and use. Each set point (temperature humidity and CO2) are programmed using a set of dedicated knobs. Readings are displayed on easy-to-read digital displays. The sensor that measures the temperature humidity light and CO2 levels in your room attaches to the controller with a 15 ft cord. Enclosure resists dust

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

Compatible with Titan Controls® CO₂ Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter—0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High-quality oilless pressure gauge. Includes two plastic tank washers and 12 ft of CO₂ dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 V/ 60 Hz.

Controls and monitors CO₂ from 0 to 2,000 parts per million (PPM). CO₂ enrichment or CO₂ exhaust features. Easy to setup and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 V/ 60 Hz.

Atlas® 1 CO₂ Monitor/Controller comes with a 25 ft remote sensor. It features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO₂. Simple to use and easy to operate. 15 Amps/120 V/ 60 Hz., The sensor comes factory calibrated for precise CO₂ readings and utilizes low voltage technology.

• Includes sensor nose with two TEROS ONE sensors.
• Delivers 10x more precise electrical conductivity measurements.
• Measures water content and volumetric water content.
• Tracks substrate temperature for optimal root zone management.
• Provides continuous data synced to AROYA every three minutes.
• Costs less with enhanced features after extensive R&D.
• Seamlessly integrates with AROYA software platforms.
• Designed for durability with corrosion-resistant materials.
• Offers easy installation with stainless steel needle design.
• Features automatic calibration for various grow media.

!! NOTE: AROYA GO bundle or AROYA Core with an included software license is a requirement for using and purchasing this product.

• Monitors air temperature, relative humidity, VPD, and ambient CO₂ levels.
• Provides accurate VPD calculations with precise temperature and humidity data.
• Samples ambient CO₂ five times per minute for precise CO₂ control.
• Integrates with the AROYA app for automatic data syncing every three minutes.
• Easy installation with included pulley system and hanging hooks.
• Rugged construction for durability in demanding grow environments.
• Wireless BLE mesh network connectivity for reliable data transmission.
• 48V PoE power supply with 3W peak consumption.
• Trade-in discount of 25% for upgrading from an old AROYA climate station.
• Measures temperature (-10 to 50 °C) and CO₂ (0 to 2,000 ppm) with high accuracy.

• Includes sensor nose with one TEROS ONE sensor.
• Delivers 10x more precise electrical conductivity measurements.
• Measures water content and volumetric water content.
• Tracks substrate temperature for optimal root zone management.
• Provides continuous data synced to AROYA every three minutes.
• Costs less with enhanced features after extensive R&D.
• Seamlessly integrates with AROYA software platforms.
• Designed for durability with corrosion-resistant materials.
• Offers easy installation with stainless steel needle design.
• Features automatic calibration for various grow media.

!! NOTE: AROYA GO bundle or AROYA Core with an included software license is a requirement for using and purchasing this product.

• Ensures precise alignment of AROYA moisture sensors.
• Optimizes sensor contact with the substrate.
• Facilitates easy and error-free installation.
• Mitigates substrate inconsistencies for accurate readings.
• Enhances data accuracy for better grow insights.
• Built with durable materials for long-term reliability.
• Recommended for use with three sensors per strain per 1,000 sq. ft.
• Helps maintain consistent sensor performance with regular monitoring.
• Ideal for fresh installations to avoid pre-existing substrate issues.
• Compatible exclusively with AROYA moisture sensors.

• Delivers precise PAR (Photosynthetically Active Radiation) measurements.
• Suitable for all light sources, including modern LED technologies.
• Exclusive design for seamless integration with the AROYA platform.
• Measures wavelengths within a 400 to 700 nm ± 5 nm spectral range.
• Provides accurate readings crucial for crop management practices.
• Supports advanced data analysis and crop steering.
• Enhances light management for improved yield and quality.
• Ensures precision in light measurement across diverse cultivation setups.
• Compatible with AROYA GO for a complete cultivation toolkit.
• Aids in better decision-making through enhanced data analytics.

• Monitors water content, electrical conductivity, and temperature.
• Features Bluetooth for wireless data transfer and real-time monitoring.
• Includes the TEROS 12 Substrate Sensor for precise environmental data.
• Enhances cultivation efficiency through advanced substrate monitoring.
• Wirelessly transmits data to the SOLUS and AROYA mobile apps.
• Compact design for easy installation and integration.
• Requires AROYA Core subscription for full app functionality.
• Comes with Bluetooth dongle, two AA batteries, and alignment tool.

• Compatible with AROYA devices with serials H11, H31, and H32.
• Offers a 4.15 dBi gain for enhanced signal strength.
• Features an RP SMA connector for secure attachment.
• Whip-style design allows flexible positioning for optimal signal performance.
• Built with durable materials to withstand environmental conditions.
• Easily connects to routers, access points, and RF equipment.
• Ideal for improving wireless communication in various devices.
• Requires an RP SMA port for compatibility.

Includes:

• Two TEROS ONE substrate sensors.
• One CLIMATE ONE climate station.
• One GATEWAY data hub*.
• Accessory kits for GATEWAY and CLIMATE ONE.
• Substrate sensor alignment tool.
• Three years of AROYA software access for three users (standard pricing after).
• 60 days of rolling cloud data storage*.
• Irrigation control integration (controller not included).

• Adjustable hanging cable with mounting hooks.
• 10 ft (3.05 m) power cable (PoE 802.11AF).

Accessory Kit (CE Version) for AROYA Gateway H211

Wireless to Internet Data Transfer for AROYA Gateway H211

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.