Lighting

• Bare-wire-end male power cords.
• Used between a ballast and a power outlet.
• Gauge: 16/3.
• Length: 6 feet (1.8 meter).

• PhysioSpec indoor spectrum caters to various growth stages.
• Ideal for propagation to full-cycle microgreen and leafy green cultivation.
• Offers energy-efficient and space-saving benefits.
• Accelerates time-to-harvest.
• Voltage: 120 to 277 V.

• Maximizes the grow space for higher crop yields and better quality.
• Designed for single or multi-tier growers.
• A bright and flexible rack lighting solution.
• Light output PPF: 2,180 µmol/s.
• Efficacy: 2.75 µmol/J @ 277V AC.
• AC input power: 790 W @ 277 V AC.
• Certifications: IEC60598-1, UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec™ Broad R4.
• Length: 47 inches (1,194 millimeters).

• Three-way splitter.
• 6P6C connection jacks.
• Four-piece kit.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 10 foot (3 meter) cord.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 6 foot 6 inch (198 centimeter) cord.

• AC/Pushlock/Male/3-Pin/M19.
• DC/Pushlock/Female/2-Pin/M19.
• DIM/Pushlock/Male/3-Pin/M12.
• Power supply only.

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 3 foot (1 meter) cord.

• Designed for high-performance vertical farms.
• Easily installed in vertical grow racks, pallet racks, wire shelving units (baker's racks), and growth chambers.
• Ideal for cultivation of leafy greens, microgreens, herbs and other vegetables.
• PhysioSpec™ BROAD R3 for propagation and full-cycle cultivation.
• Light bar length: 48 inches (1.2 meters).
• (4) 3 bar fixtures.

• Double-ended light fixture.
• Optimized for low-ceiling rooms and greenhouses.
• Efficiency and uniformity guarantee over 95% light transmission to plants.
• Built-in spirit level ensures even light spread.
• Each light ray is either transmitted directly to plants or hits the aluminum reflector once.
• Output µmol/s: 2,100
• Beam angle: 140° wide.
• Power: 1,000 watts.
• Voltage: 120 - 240 volts.

• Double-ended light fixture.
• Optimized for low-ceiling rooms and greenhouses.
• Efficiency and uniformity guarantee over 95% light transmission to plants.
• Built-in spirit level ensures even light spread.
• Each light ray is either transmitted directly to plants or hits the aluminum reflector once.
• Power: 6/750 watts.
• Voltage: 120 - 240 volts.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.
• Voltage: 277-480 V.

*based on average wattage of each fixture.

• High quality plugs securely connect to any IEC14 ballast.
• Male 240 V plug.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 2,110
• Efficacy [µmol/J]: 2.87
• Wattage: 700W
• Voltage: 208-480V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 11.9 kg [26.3 lb]
• Spectrum: R45

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 3 feet (1 meter).

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 25 foot (7.6 meters).
• Voltage: 300 V.

• Cone shape provides broad light diffusion.
• Chrome finish for maximum light reflection.
• Light weight and easy to assemble.
• Can accommodate all bulbs (not included).
• Includes four-piece base, a bracket to hold a mogul socket and screws.
• Mogul socket and power cord sold separately.
• Size: 4 feet (1.2 meters).