Lighting

• Bridges the gap between vegetative and flowering stages.
• Ensures plants' responses are at their fullest at all times.
• Leads to stronger root growth.
• Produces compact plants with extremely short internodal spacing.

• A true flowering lamp for indoor gardeners.
• The PowerVEG 660 produces a red light spectrum.
• Enhances the flowering stage for plants.
• Essential for triggering fruiting and flowering.

• Designed to maximize plant growth by optimizing the three necessary lighting components.
• Provides a quality spectrum that maximizes plant quality and high yields.
• Included e-ballast provides a consistent and stable power supply to the lamp for reliability of operation.
• Reflector focuses all available light produced by the lamp and targets the canopy of the plants with a uniform distribution of photons.
• Will provide the highest quality plants and yields for many years with proper system maintenance.
• Includes HORTILUX 600W Ceramic HPS and HORTILUX 600W Blue Metal Halide lamps.

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 46.2 x 34 x 2.95 in (117 x 86 x 7.5 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 14.5 in x 3 in (60 x 37 x 7.6 cm).

15 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

• High quality plugs securely connect to any IEC14 ballast.
• Male 240 V plug.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 3 feet (1 meter).

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 16/3.
• Length: 15 foot (4.5 meters).
• Voltage: 600 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 16/3.
• Length: 25 foot (7.6 meters).
• Voltage: 600 V.

Dutch Lighting Innovations™ (DLI) 16-foot (4.8-meter) cable pack.

Dutch Lighting Innovations™ (DLI) 50-foot (15-meter) cable pack.

• Double-ended light fixture.
• Optimized for low-ceiling rooms and greenhouses.
• Efficiency and uniformity guarantee over 95% light transmission to plants.
• Built-in spirit level ensures even light spread.
• Each light ray is either transmitted directly to plants or hits the aluminum reflector once.
• Output µmol/s: 2,100.
• Beam angle: 140° wide.
• Power: 1,000 watts.
• Voltage: 208 - 240 volts.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 6 foot (1.8 meters).
• Voltage: 300 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 25 feet (7.6 meters).
• Voltage: 600 V.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Designed to operate flawlessly with metal halide lighting systems.
• Allows one-dimensional systems to act as complete lighting systems by accepting both metal halide (MH) and this conversion bulb.
• Provides optimum red spectral energy to promote flowering and fruiting in plants.
• Metal halide bulbs promote plant growth.
• Wattage: 940 W.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.
• Wattage: 1,000 W.

• Designed to outperform standard MH lamps.
• Creates higher amounts of UV and infrared rays for stronger and woodier stalks.
• Higher red spectrum for flowering efficiency.
• Higher PAR efficiency than MH or HPS lamps.
• Superior lamp to color consistency.
• High initial and maintained lumens.
• Dependable long life (15,000+ hours).
• Universal Burning Position.
• High efficacy / low operating cost.
• Can work with both normal- and pin-operated sockets.
• Environmentally friendly.
• High color rendering index (CRI): 90+ out of 100.
• Lower heat output watt-per-watt.
• 3,100 K.
• 624 µmol.

• Used with the LightEnerG Premium or Econo Cord and Socket Set.
• Provides mounting and support for the bulb and shade assembly.
• Proprietary design.
• Large hole.

• Engineered for use with ultra high frequency (UHF) electronic ballasts.
• Provides an extensive coverage area.
• cETL approved.
• Size: 36 x 27.5 inches (91 x 70 centimeters).
• Cord length: 15 foot (4.5 meters).

• Engineered for use with ultra high frequency (UHF) electronic ballasts.
• Provides an extensive coverage area.
• cETL approved.
• Width: 36.5 inches (92.7 centimeters).
• Height: 30 inches (76.2 centimeters).
• Cord length: 15 foot (4.5 meters).
• Weight: 5.95 pounds (2.7 kilograms).