Greenhouses, Grow Tents, & Systems

• Manufactured with Avara Technology, a proprietary food-grade material.
• Patented 7" Crystal Clear design with Perfect Fit system for a secure fit with standard 1020 trays.
• Constructed from thick, high-grade material for excellent light transmission and long-term durability.
• Perfect 2-Finger Easy Vent ensures precise humidity control.
• BPA-free, non-off-gassing, reusable and recyclable, contains reclaimed ocean plastics.
• Dimensions (LxWxH): 21.5 x 11 x 7.5 in (54.61 x 27.94 x 19.05 cm).

• Manufactured with Avara Technology, a proprietary food-grade material.
• Patented, 4" Crystal Clear design, with Perfect Fit system for a secure fit with standard 1020 trays.
• Constructed from thick, high-grade material for excellent light transmission and long-term durability.
• Perfect 2-Finger Easy Vent ensures precise humidity control.
• BPA-free, non-off-gassing, reusable and recyclable, contains reclaimed ocean plastics.
• Dimensions (LxWxH): 21.5 x 11 x 4.2 in (54.61 x 27.94 x 10.67 cm).

• Manufactured with Avara Technology, a proprietary food-grade material.
• Patented, 4" Crystal Clear design, with Perfect Fit system for a secure fit with standard 1020 trays.
• Constructed from thick, high-grade material for excellent light transmission and long-term durability.
• Perfect 2-Finger Easy Vent ensures precise humidity control.
• BPA-free, non-off-gassing, reusable and recyclable, contains reclaimed ocean plastics.
• Dimensions (LxWxH): 21.5 x 11 x 4.2 in (54.61 x 27.94 x 10.67 cm).

Soft, non-abrasive mesh gently protects stems, vines and foliage. Ideal for guiding and supporting vine, flowering and vegetable plants. Nylon mesh is durable and long lasting. 6 in square reach-through holes. Install vertically or horizontally depending on your gardening application.

Soft, non-abrasive mesh gently protects stems, vines and foliage. Ideal for guiding and supporting vine, flowering and vegetable plants. Nylon mesh is durable and long lasting. 6 in square reach-through holes. Install vertically or horizontally depending on your gardening application.

Soft, non-abrasive mesh gently protects stems, vines and foliage. Ideal for guiding and supporting vine, flowering and vegetable plants. Nylon mesh is durable and long lasting. 6 in square reach-through holes. Install vertically or horizontally depending on your gardening application.

The Grower's Edge® Soft Mesh Trellis Netting is soft, non-abrasive mesh that gently protects stems, vines and foliage. Ideal for guiding and supporting vine, flowering and vegetable plants. The nylon mesh is durable and long lasting. The trellis netting has 3.5 in square reach-through holes. Install vertically or horizontally depending on your gardening application.

The Grower's Edge® Soft Mesh Trellis Netting is soft, non-abrasive mesh that gently protects stems, vines and foliage. Ideal for guiding and supporting vine, flowering and vegetable plants. The nylon mesh is durable and long lasting. The trellis netting has 3.5 in square reach-through holes. Install vertically or horizontally depending on your gardening application.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Features a LED display panel. Removable water tank with an automatic shutoff when reservoir is full. Internal condensate pump for easy water disposal. Can also be plumbed for permanent drainage. Tank reservoir capacity is 10 liters or 21 pints. 7 Amps/680 W/271 CFM. 115 V.

Ideal-Air™ Pro Series 100 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 100 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 100 pints (86°F, 80% RH); Power: 6.75 Amps/728 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

Ideal-Air™ Pro Series 180 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 180 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 180 pints (86°F, 80% RH); Power: 12.31 Amps/1350 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 300 pints per day of ultra-fine mist. 115 V, 60 Hz and 7.8 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 600 pints per day of ultra-fine mist. 115 V, 60 Hz and 10.3 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

• Pressure-compensating device.
• Delivers water to multiple locations.
• Features a 1/2-inch FPT inlet and 8 swivel-port 3/16-inch outlets.
• Includes built-in backflow prevention for added protection.
• Optional port plugs available for unused ports.
• Flow rate: 10 GPH.
• Pressure compensation range: 20–60 PSI.
• Constructed using durable ABS plastic.

• Pressure-compensating device.
• Delivers water to multiple locations.
• Features a 1/2-inch FPT inlet and 8 swivel-port 3/16-inch outlets.
• Includes built-in backflow prevention for added protection.
• Optional port plugs available for unused ports.
• Flow rate: 6 GPH.
• Pressure compensation range: 20–60 PSI.
• Constructed using durable ABS plastic.

Hydro Flow® 's complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight connection. These fittings offer strength and durability. Hydro Flow Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.

• Interlocking bench tray panels for creating continuous grow surfaces.
• Fits standard 4-ft benches and maximizes square footage.
• Low-profile 6.35 cm height with no arch lip for full workspace use.
• Nestable, modular panels create custom lengths with ease.
• Durable, BPA-free ABS construction that is thicker than comparable trays.

• Deep water culture (DWC) bucket system for efficient hydroponic growth.
• Simple, forgiving design grows large plants with minimal setup.
• Direct air injection oxygenates nutrients without air stones.
• Includes air pump and air hose to promote strong root development.
• Watertight 5-gal bucket with 20 cm basket for various grow media.
• Compatible with many hydroponic media such as clay pebbles or coco.