Irrigation & Water Management

• 3/4 inch water hammer arrestor kit.
• Normal operating pressure - 35 to 500 psi.
• Spike pressure not to exceed 2,000 psi.

Features: stainless steel water hammer arrestor, 4-inch nipple, tee, elbow, close nipple, union, and a roll of thread seal tape.

Injection seal kit with AFLAS seals for the Dosatron® D14MZ3000 - 14 GPM.

Kit Includes:

• Injection sleeve o-ring.
• Check valve assembly.
• Injection stem o-ring.
• Plunger with seal.

Dosatron®'s Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It's a must for silicates.

Includes:

• Union.
• Mixing chamber.
• Nipples.
• Seal thread tape.

• 1 1/2 inch water hammer arrestor kit.
• Normal operating pressure - 35 to 500 psi.
• Spike pressure not to exceed 2,000 psi.

Features: stainless steel water hammer arrestor, 4-inch nipple, tee, elbow, close nipple, union, and a roll of thread seal tape.

Mini maintenance kit for the D40MZ3000 -40 GPM. The Mini Maintenance Kits are the perfect, economical solution for Dosatron® users and growers who perform maintenance on a regular schedule.

Kit Includes:

• Plunger seal
• Upper check valve assembly
• Dosa-Lube (Silicone)

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 30 inches (76 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Netafim 4-Way Dripper Stake Assemblies simplify installation.
• Includes 4-way fitting and angled barbed stakes, preassembled for convenience.
• 36-inch (91.4 cm) lengths of Super Flex UV-protected PE tubing.

• TurboNet labyrinth with large water passage ensures reliable performance.
• CNL check valve prevents drainage and maintains consistent flow.
• Pressure compensating for uniform water delivery with varying pressure.
• UV-resistant and withstands exposure to standard fertilizers.
• Minimum operating pressure of 10 PSI.

• Superior clog resistance with Netafim Typhoon™ emitters.
• Four evenly spaced emitters distribute water uniformly for optimal rootzone development.
• Quick action installation: place ring in the container, then connect the pre-cut micro tubing.
• Compatible with 2 - 15 Gallon (10 - 60 liter) containers.
• Diameter: 5 inches (120 millimeters).
• Flow rate: four outlets with flow of 0.53 GPH (2.0 L/h) each at 14.5 psi (1.0 bar).
• Chemical and UV resistance for durability.
• Colored light gray for improved light reflection.
• Max. operating pressure for hub drippers - 58.0 psi (4.0 bars).

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Ratio Range mL: 3.75 to 37.5 mL.
• Ratio Range tsp: 0.75 to 7.5 tsp.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 4.3 to 85 PSI.
• Dimensions: 19 1/18″ x 6 5/16″.
• Weight: 6 lbs.
• Connection Size: 3/4″ NPT.
• Maximum Temperature: 104° F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Lo-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 125 1/4″ x 8 1/2″.
• Weight: 6 lbs.
• Connection Size: 1.5″ NPT.
• Maximum Temperature: 104°F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Hi-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.