LED Lighting

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Spectrum: PhysioSpec Indoor™.
• Length: 32.5 inches (826 millimeters).
• Lightbar only.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3x & DUO 3x2 features Fluence’s diversified PhysioSpec™ spectra and market-leading efficacies up to 3.8 μmol/J, enabling the replacement of HPS lights with significant energy savings. It features DUO remote and cradle mounts, offering enhanced design flexibility and enabling growers in challenging or intricate lighting environments. Compared to VYPR 3p, VYPR DUO 3x2 cradle mount emits the same amount of light but at a half of the VYPR 3p fixture length. This allows the installation of many more fixtures on a single truss, drastically increasing the available light per truss for high PPFD applications.

Built upon patented thermal management technologies, it provides a cost-effective solution for grow spaces with constrained ceiling heights, such as indoor or low greenhouses.

The Fluence RAPTR Series is a high-output top light ideal for 1:1 HPS replacement in controlled environment agriculture. Designed to deliver maximum intensity with industry-leading efficacy, RAPTR is available with two optical distributions and a range of Physiospec™ spectrums tailored for high intensity indoor horticulture and high-efficiency greenhouse applications.

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 1,190
• Efficacy [µmol/J]: 3.06
• Wattage: 390W
• Voltage: 120-277V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 7.9 kg [17.4 lb]
• Spectrum: R5

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 1,210
• Efficacy [µmol/J]: 3.06
• Wattage: 390W
• Voltage: 208-480V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 7.9 kg [17.4 lb]
• Spectrum: R5

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 1,750
• Efficacy [µmol/J]: 2.91
• Wattage: 620W
• Voltage: 120-277V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 10.7 kg [23.5 lb]
• Spectrum: R45

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4.
• OUTPUT PPF (μmol/s) 400-700nm: 1,690 | 400-800nm: 1,730
• Efficacy (PE) (µmol/J): 2.7 | @50% Dim: 2.9
• Dimensions: (LxWxH): 35.5 x 4.2 x 3.6 in (900 x 107 x 91 mm)
• Weight: 8.4 lbs (3.8 kg)
• Input Voltage: 120 to 277 V AC.
• W AC: 634W

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 1,450
• Efficacy [µmol/J]: 2.85
• Wattage: 500W
• Voltage: 120-277V
• Dimensions [LxWxH]: 47 x 30 x 2.36 in [119.38 x 76.2 x 5.99 cm]
• Weight: 7.9 kg [17.4 lb]
• Spectrum: R45

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 1,790
• Efficacy [µmol/J]: 2.91
• Wattage: 620W
• Voltage: 208-480V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 10.7 kg [23.5 lb]
• Spectrum: R45

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• PPF Output [µmol/s]: 2,200
• Efficacy [µmol/J]: 2.76
• Wattage: 800W
• Voltage: 120-277V
• Dimensions [LxWxH]: 47 x 43 x 2.36 in [119.38 x 109.22 x 5.99 cm]
• Weight: 11.9 kg [26.3 lb]
• Spectrum: R4a

Increase A-grade buds, reduce trim waste, and boost overall crop value with Fluence PYTHN—the purpose-built under-canopy lighting solution.

• Wide 145° distribution provides optimal light uniformity for under-canopy applications.
• Modular installation reduces costs with snap-in connections and flexible configurations.
• Targeted light quality specifically engineered for lower canopy development.
• Efficacy: Up to 3.4 µmol/J.
• IP Rating: IP66-rated, chemical-resistant enclosure.
• Dimming: 0-10V with RJ11 interface.
• Dimensions (LxWxH): 44.88 x 3.23 x 4.13 inches (114 x 8.2 x 10.5 centimeters).
• Spectrum: Broad R8
• Voltage: 347-400V

• Enables the replacement of HPS lights with significant energy savings.
• Ideal for distributing light uniformly in grow environments with constrained ceiling heights.
• Also suitable for low DLI crops, and for extension of the natural photoperiod.
• Light output PPF: 876 µmol/s.
• AC power: 336 @ 277 V AC (W).
• Efficacy: 2.6 µmol/J @ 277 V AC.
• Certifications: ETL, cETL, CE, Wet Location.
• Spectrum: PhysioSpec™ BROAD R4 Indoor.
• Size (L x W x H): 24.09 x 2.91 x 3.23 inches (612 x 74 x 82 millimeters).

• Enables the replacement of HPS lights with significant energy savings.
• Ideal for distributing light uniformly in grow environments with constrained ceiling heights.
• Also suitable for low DLI crops, and for extension of the natural photoperiod.
• Light output PPF: 888 µmol/s.
• AC power: 335 @ 277 V AC (W).
• Efficacy: 2.7 µmol/J @ 277 V AC.
• Certifications: ETL, cETL, CE, Wet Location.
• Spectrum: PhysioSpec™ BROAD R3 Greenhouse.
• Size (L x W x H): 24.09 x 2.91 x 3.23 inches (612 x 74 x 82 millimeters).

The Fluence VYPR 3x features market-leading efficacies up to 3.7 µmol/J, enabling the replacement of HPS lights with significant energy savings. At a half of VYPR 3p’s size and power, VYPR 3x is ideal for distributing light uniformly in grow environments with constrained ceiling heights. VYPR 3x is also suitable for low DLI crops, and for extension of the natural photoperiod.

Combined with Fluence’s beam widening reflectors, VYPR 3x further improves light uniformity and reduces the number of fixtures required in a given cultivation area, lowering the capital investment and accelerating the LED adoption in horticulture lighting.

The Fluence SPYDR FANG is a high-performance LED grow light for craft cultivation. Enabling micro-growers to command their grow with an optimized 1600 µmol/s (PPF) output, PhysioSpec™ Broad R4 spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation.