Extension, Power, & Lamp Cords
When it comes to reliable and durable extension, power, and lamp cords for your grow lights, ballasts, and reflectors, we offer a selection designed to meet the unique needs of indoor growers. Whether you're setting up a new grow space or upgrading cables, our wide range provides reliable solutions for every indoor gardening setup.
Gavita Wieland Mains Power Cord (10' / 3 m)
- Optional power cord for 277 volt or higher Gavita® fixtures.
- Can be disconnected by a fixture-side IP68 Wieland RST plug.
- Can be hardwired.
- 10 foot (3 meter) cord.
Gavita Classic 277 - 347 V 3-Pin Wieland Cordset 6' 6" (198 cm)
- Optional power cord for 277 volt or higher Gavita® fixtures.
- Can be disconnected by a fixture-side IP68 Wieland RST plug.
- Can be hardwired.
- 6 foot 6 inch (198 centimeter) cord.
Gavita 3-Pin Wieland Mains Power Cord 3' (1 m)
- Optional power cord for 277 volt or higher Gavita® fixtures.
- Can be disconnected by a fixture-side IP68 Wieland RST plug.
- Can be hardwired.
- 3 foot (1 meter) cord.
LightEnerG 120 V Male Power Cord with Bare Wire End 14/3 (3 ft / 1 m) (600 V)
- Bare-wire-end male power cords.
- Used between a ballast and a power outlet.
- Gauge: 14/3.
- Length: 3 feet (1 meter).
Gavita Controller Cable RJ9 / RJ14 25 ft / 7.5 m
Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.
Gavita E-Series LED Adapter Interconnect Cable RJ45 / RJ9 25 ft / 7.5 m
- Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
- 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.
Gavita E-Series LED Adapter - 120 - 277 Volt
The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.
Gavita 3-Pin Wieland Adapter to 5-Pin Wieland for LED
- Conversion cable for Gavita LED fixtures.
- 3-pin to 5-pin Wieland connections.
Gavita CT 1930e Dummy Plug
- Used to operate one or more Gavita® CT 1930e light fixtures without the use of a lighting controller.
- Ensures continuous operation at 100% output* when placed on the input of the first fixture.
Fluence GreenPower LED Toplighting Main Power Cable
- Main Power Cable for Fluence GreenPower LED.
- Length: 6.6 feet (2.0 meter), pre-assembled.
LightEnerG Mogul Socket (No Leads)
- Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
- Accommodate all mogul base bulbs in a universal position.
- Mogul cap and washer are included.
Fluence Dimming Adapter Cable, M12 Screw Lock to M16 Push Lock, 6 in (152 mm)
Adapts T-cable Drop or Trunk Termination to Push Lock M16 Dimming Port.
- Cable Length: 6 inch (152 millimeter).
- Input Connector: Screw Lock Male M12 3-pin.
- Output Connector: Push Lock Female m16 3-pin.
- Cable Type: AWM UL 21996/UL 22190 300 V 2 x 20 AWG/ 0.5 mm², Plus Drain.
LightEnerG Female Power Supply Outlet
- Used to attach LightEnerG power cords to ballasts.
- Must be wired by a qualified electrician.