Extension, Power, & Lamp Cords
When it comes to reliable and durable extension, power, and lamp cords for your grow lights, ballasts, and reflectors, we offer a selection designed to meet the unique needs of indoor growers. Whether you're setting up a new grow space or upgrading cables, our wide range provides reliable solutions for every indoor gardening setup.
Gavita 8 ft Power Cord 120 Volt for LED
- Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
- 120-volt plug to 5-pin Wieland connection.
LightEnerG Ballast Power Cord 14/3 (6 ft / 1.8 m) (240 V)
- High quality plugs securely connect to any IEC14 ballast.
- Male 240 V plug.
- Female IEC13 end.
- Gauge: 14/3.
- Length: 6 feet (1.8 meters).
LightEnerG 120 V Female Power Cord with Bare Wire End HD 14/3 (6 ft / 1.8 m)
- Versatile bare-wire-end female power cords.
- Suitable for a variety of applications.
- Gauge: 14/3.
- Length: 6 feet (1.8 meter).
LightEnerG 120 V Female Power Cord with Bare Wire End HD 14/3 (1 ft / 30 cm)
- Versatile bare-wire-end female power cords.
- Suitable for a variety of applications.
- Gauge: 14/3.
- Length: 3 feet (1 meter).
Gavita 8 ft 5 Pin Power Cord 277-480 V
- Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
- 277- to 400-volt bare wire to 5-pin Wieland connection.
Fluence GreenPower LED Toplighting Main Power Cable
- Main Power Cable for Fluence GreenPower LED.
- Length: 6.6 feet (2.0 meter), pre-assembled.
Gavita Controller Cable RJ9 / RJ14 25 ft / 7.5 m
Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.
Gavita E-Series LED Adapter Interconnect Cable RJ45 / RJ9 25 ft / 7.5 m
- Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
- 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.
Gavita E-Series LED Adapter - 120 - 277 Volt
The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.
Gavita 3-Pin Wieland Adapter to 5-Pin Wieland for LED
- Conversion cable for Gavita LED fixtures.
- 3-pin to 5-pin Wieland connections.
LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (6 ft / 1.8 m) (600 V)
- Bare-wire-end male power cords.
- Used between a ballast and a power outlet.
- Gauge: 16/3.
- Length: 6 feet (1.8 meter).
LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (12 ft / 3.6 m) (600 V)
- Bare-wire-end male power cords.
- Used between a ballast and a power outlet.
- Gauge: 16/3.
- Length: 12 feet (3.6 meter).
LightEnerG Ballast Power Cord 14/3 (6 ft / 1.8 m) (120 V)
- High quality plugs securely connect to any IEC14 ballast.
- Male 120 V plug.
- Female IEC13 end.
- Gauge: 14/3.
- Length: 6 feet (1.8 meters).
LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (6 ft / 1.8 m) (300 V)
- Bare-wire-end male power cords.
- Used between a ballast and a power outlet.
- Gauge: 16/3.
- Length: 6 feet (1.8 meter).
LightEnerG 120 V Male Power Cord with Bare Wire End 14/3 (6 ft / 1.8 m) (300 V)
- Bare-wire-end male power cords.
- Used between a ballast and a power outlet.
- Gauge: 14/3.
- Length: 6 feet (1.8 meter).
