Gavita

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• Designed to be used with Gavita® 1700e LED fixtures.
• Allows users to control fixtures with a Gavita EL series controller.
• Utilizes cables with RJ45 connectors for daisy chaining the control signal between adapters.
• Adapters are cETLus listed and IP66 rated for commercial use.
• Additional RJ45 to RJ45 cables available.
• Use RJ45 to RJ9 cable for connection to the Gavita Master Controller EL1 or EL2.
• Use three-way splitter for branching signal into dual paths.

• Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
• 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Designed to be used with Gavita 1700e LED fixtures.
• Branches the signal into dual output paths.
• For cables with RJ45 connectors.

• Connects Gavita LED fixtures together.
• 10-foot (3-meter) RJ45-to-RJ45 signal cable.

Replacement reflector for Gavita Pro line and HortiStar. Easy to install no tools required. Wide spread for optimal uniformity (150° beam angle). Suitable for double-ended 750-1000W HPS. This reflector is most suitable for overlapping plans. Designed for uniformity. Made from MIRO® aluminum.

Gavita® horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5,000 hrs: >96%. Color temperature is 2,100° K and the lamp base is K12 x 30s. Suitable for High Frequency Gavita ballasts. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 277- to 400-volt bare wire to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 208- to 240-volt plug to 5-pin Wieland connection.

Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

• Connects Gavita® EL3 Master controller to first Titan Controls® VPD Sensor or Titan Controls® Substrate Sensor.
• Products then daisy chain together after this first connection.

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.

• Designed to maximize the performance of your compatible Gavita® fixtures.
• Simplifies lighting management with under-friendly interfaces.
• Range of models ensures the right fit for equipment needs.
• Latest generation EL3 controller compatible with Titan Controls™ Grow Room Sensors.

Each Gavita LED Bracket unit includes 2 brackets (sold as a pair).