Chillers, Heaters, & Purification

Options from 6,000 GPD to 19,000 GPD, depending on water source. Liquid filled pressure gauges for pre-filter in and out, concentrate pressure and system pressure. Stainless steel multistage high pressure RO pump with SS pump throttling valve. 5 micron 20 in x 4.5 in cartridge filter and housing sediment pre-filter. System control, recycle control and pump throttle valves.

• Options from 6,000 GPD to 19,000 GPD.
• Liquid filled pressure gauges for pre-filter in and out, concentrate pressure and system pressure.
• Stainless steel multistage high pressure RO pump with SS pump throttling valve.
• 5 micron 20 in x 4.5 in cartridge filter and housing sediment pre-filter.
• Product, concentrate and recycle flowmeters.
• ARCS treats the condensate runoff for general reuse without producing any waste.
• ARCS treats 10 GPM [14,400 GPD] up to 20 GPM [28,800 GPD].

Fight warm water problems with an EcoPlus® Water Chiller! Digital control system for accurate, stable water temperature that helps to keep your reservoir cool. Environmentally safe, freon-free R134a refrigeration system that has high energy efficiency. Will chill the water from 37° to 90°. Anticorrosive, pure titanium evaporator. Includes overcurrent protection system and memory protection. Max water volume of 132 gallons. Recommended pump size 317 to 793 GPH. Includes plumbing connections of 3/4 in male NPT with hose fittings. 120 V at 4.4 Amps. Dimensions are 21 in W x 15.5 in D x 22 in H and weighs 52 lb.

This float valve features a 1/4 in quick connect fitting and adjustable water level. It can be mounted vertically or horizontally. With stainless steel and PVC components. The float valve allows you to fill a reservoir or tank unattended to your desired water level. For use with all Stealth-RO and Small Boy models or most RO and filter systems with 1/4 in tubing.

Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth ROâ„¢ 150 produces 150 GPD of ultra pure water. Includes: 3-stage RO unit, 1 RO membrane, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.

Unit size: 15 in x 16 in x 6 in and weight: 10.8 Ib.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output.

Stealth-RO™ double-ended wrench for standard filter and membrane housings.

• Fitting kit for the Hydro-Logic® Evolution RO1000™.
• Replacement parts.

• Engineered for use with Stealth-RO™ 150 Systems.
• Regulates water flow during the flushing process.
• Maintains precise control to optimize system performance.
• Enhances efficiency and effectiveness of filtration.
• Provides reliable operation with seamless system integration.
• Essential for consistent, high-quality water output.

For use with source water high in hardness, the Antiscalant kit reduces calcium/magnesium scale accumulatio to extend the life of membranes. It is manufactured to strict HydroLogic quality and performance standards. Replace after 75,000 gallons.

The GroGreen Filter has a customized flow restrictor allowing ideal contact time with filtration media to maximize the reduction of chlorine, sediment, rust, silt, mercury, lead and PCBs (organic chlorine). It will help protect beneficial bacteria to invigorate organic compost, soil amendments, and bio-teas. Easily attaches to your garden hose with 11,000 Gallon Capacity (30 GPD = 365 days), up to 2 GPM. KDF85/Granulated Catalytic Activated Carbon removes up to 99% of chlorine and chloramines.

HyperLogic 4" x 40" FRP Wrapped, Low Energy, Commercial RO Membranes are typically found in our RO systems utilizing the White PVC Membrane Housings; Commercial and Industrial Series. Our genuine, OEM quality, TFC (thin film composite) membrane material delivers consistent, reliable results with tap or brackish water alike, including our Nutrient Reclaim Systems. Periodic membrane cleanings should be performed for consistant operating results. Acidic and Alkaline cleaning chemicals are available for removal of typical fouling such as Calcium Carbonate & Biological growth. Membrane replacement schedule will be diictated based on RO production & performance characteristics. Made in the USA from an ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested. Formerly HyperLogic HL 11608

HyperLogic 1" Schedule 80 PVC Monitor Crosses are designed to be used near the Inlet and Outlet of a Prefiltration Media Tank to provide helpful operational pressure and pressure delta information on our water equipment. Each Monitor Cross features a liquid filled pressure gauge for monitoring water pressure and a labcock test port allowing easy access to water testing locations when installed. 1" female slip fittings on Inlet & Outlet. Formerly HyperLogic HL 11681.1

HyperLogic 220v Chemical Injector is commonly used with our Commercial, Industrial and Heavy-Industrial Series RO systems in applications such as Anti-Scalant, Acid or Chlorine injection. This kit includes the 0.0-3 GPD adjustable peristalic pump, 15 gallon tank and low level shut-off float switch. Operates on 220V Single Phase 60Hz (0.9A). Formerly HyperLogic 11716

HyperLogic Anti-Scalant Concentrate is a broad spectrum anti-scalant for use with our Commercial, Industrial and Heavy-Industrial RO systems to help inhibit the formation of Calcium Carbonate scale build-up. When used in conjunction with our HyperLogic Chemical Injector Systems, this anti-scalant helps to prolong membrane life and is a cost effective alternative to water softeners. Additionally, the use of a Chemical Injector over a Softener reduces system down and time & drain to waste caused by the Softener regeneration process. Please refer to your HyperLogic Owners Manual for proper dilution and injection ratio. This product MUST be diluted prior to use. Product must be stored in a temperature controlled environment away from direct sunlight. Once opened, product should be used within 1-year. Chemical Injector tank should be emptied, cleaned and rebatched monthly for best performance. 45lb. Jug. Certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals. Former HyperLogic HL 11906

HyperLogic 2.5" x 20" 5 Micron, Melt-Blown Polypropylene, Ultra-Fine Sediment Filters remove silt, rust, dirt and other assorted suspended solids from the water. Commonly used in our Industrial & Heavy-Industrial Series RO systems, located in the stainless steel housing prior the RO, they offer OEM level protection to costly equipment such as the RO pump and help extend the life of RO membranes. Replacement should be performed monthly; sooner if Filter In-Filter Out delta exceeds 10%. Formerly HyperLogic HL 13519

HyperLogic Acid (low Ph) Membrane Cleaning Powder is formulated to help remove Calcium Carbonate, Hardness, Iron and mineral scale build-up from our Industrial and Heavy-Industrial Series RO membranes. With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow or lower salt rejection than normal. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13560

With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow, strong odor or mold growth on the membrane scroll end. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13561

Formerly HyperLogic HL 13564

The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 1/4 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.

Heater tube is fully submersible. Automatic electronic heater. Double heating tube. Very durable and reliable. Easy temperature control. Ideal for saltwater and freshwater. Temp range: 68F (20C) to 93F (34C).

Fight warm water problems with an EcoPlus® Water Chiller! Digital control system for accurate, stable water temperature that helps to keep your reservoir cool. Environmentally safe, freon-free R134a refrigeration system that has high energy efficiency. Will chill the water from 37° to 90°. Anticorrosive, pure titanium evaporator. Includes overcurrent protection system and memory protection. Max water volume of 132 gallons. Recommended pump size 317 to 793 GPH. Includes plumbing connections of 3/4 in male NPT with hose fittings. 120 V at 4.4 Amps. Dimensions are 21 in W x 15.5 in D x 22 in H and weighs 52 lb.