Dosers, Pumps, & Irrigation Supplies

Injection seal kit for the Dosatron® D14MZ2 - 14 GPM. Recommended for a yearly maintenance.

Kit Includes:

• Injection sleeve o-ring.
• Check valve assembly.
• Injection stem o-ring.
• Plunger seal.

Dosatron®'s Water-Powered Nutrient Delivery System Lo-Flo Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind.

Features: Union, close nipples, nipples, tee, pressure gauge, pressure gauge tee, cross, check valve, fittings, ball valves, hose adapter, monitor, probe holder assembly, and seal thread tape.

• 3/4 inch water hammer arrestor kit.
• Normal operating pressure - 35 to 500 psi.
• Spike pressure not to exceed 2,000 psi.

Features: stainless steel water hammer arrestor, 4-inch nipple, tee, elbow, close nipple, union, and a roll of thread seal tape.

Mini maintenance kit for the Dosatron® D14MZ2 - 14 GPM. Recommended for a regular maintenance.

Kit Includes:

• Plunger seal.
• Top guide.
• Check valve cone.
• Check valve spring.
• Check valve cone o-ring.
• Dosa-Lube (Silicone).

Bottom o-ring for Dosatron Lo-Flo Mixing Chamber.

Replacement part for Dosatron® D14MZ3000.

Replacement part for Dosatron® D14MZ2/D14MZ1000.

• High flow hydroponic pump.
• Dilution Range: 1:3000 to 1:500 (0.03% to 0.2%).
• Ratio Range mL: 1.25 to 7.5 mL.
• Ratio Range tsp: 0.25 to 1.5 tsp.
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 25 1/4″ x 8 1/2″.
• Weight: 12 lbs.
• Connection Size: 1 1/2″ NPT.
• Maximum Temperature: 104° F.
• Can be installed in parallel to increase the water flow.
• 63% fewer parts, metal free piston.
• Includes a union for easy installation into the Nutrient Delivery System.

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Ratio Range mL: 3.75 to 37.5 mL.
• Ratio Range tsp: 0.75 to 7.5 tsp.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 4.3 to 85 PSI.
• Dimensions: 19 1/18″ x 6 5/16″.
• Weight: 6 lbs.
• Connection Size: 3/4″ NPT.
• Maximum Temperature: 104° F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Lo-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 125 1/4″ x 8 1/2″.
• Weight: 6 lbs.
• Connection Size: 1.5″ NPT.
• Maximum Temperature: 104°F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Hi-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.

• Includes all necessary parts for the inlet of your Nutrient Delivery System.
• Best suited for systems with consistent inlet pressure or a constant pressure pump.
• Ideal for use with a booster pump or a pump with VFD control.
• A pressure regulator is recommended for inlet pressures above 85 PSI.

Features: Union, check valve, elbows, nipples, tee, hose adapter, ball valves, coupler, filter, pressure gauge, seal thread tape.

To Complete the Lo-Flo Nutrient Delivery System, you will also need Dosatron Injectors, Mixing Chamber Kit(s), pH/ EC Monitor Kit or END Kit, and a Water Hammer Arrestor Kit.

The Dosatron® Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It’s a must for silicates.

Includes:

• Union.
• Mixing chamber.
• Nipples.
• Seal thread tape.

The EcoPlus® Convertible Bottom Draw Pump is the first hydroponic pump of its kind. With an interchangeable outlet fitting, this line of pumps fits almost all hydroponic applications. The bottom draw inlet allows the pump to operate in less than 1/2 inch of water. The convertible outlet offers the freedom of a horizontal or vertical water outlet, allowing the user to choose the best water flow option for their needs. US Patent Pending No. 14/642,557.

This heavy duty, high quality pump is the latest introduction to the EcoPlus pump family. 190 watts. Bottom Intake. Removes water down to 0.125 in. Max height 20.3 ft. 12 ft power cord. Fittings included: 1 in NPT hose fitting and 1 in barbed fitting. Submersible use only.

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

Highly reliable electronic booster sets for supplying water for domestic applications. Equipped with an electronic safety device that protects the pump from dry-running. Built-in non return valve. Designed to automatically start and stop the pump when taps are open or closed. Automatic and manual reset. These type of pumps give a constant pressure and flow rate so they are excellent for irrigation systems. Anticorrosive and rustproof materials. Motor with thermic overload protection.

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

• Automatically collects real-time EC and irrigation volume data from feed and runoff.
• Provides an up-to-the-minute, accurate view of irrigation execution without manual monitoring.
• Tracks volume of water applied, runoff volume, and EC data at both ends.
• Continuously measures both inflow and outflow, unlike manual methods.
• Enables real-time adjustments to irrigation strategy based on root zone conditions.
• Tracks feed EC, substrate EC, and drain EC for a holistic view of nutrient movement.
• Uses real-time runoff data to track field capacity, avoiding imprecise VWC estimates.

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

Dosatron® Water-Powered Nutrient Delivery System Hi-Flo Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System.

Features: Union, gauge, check valve, elbows, nipples, cross, reducer bushings, hose adapter, ball valve, filter, pressure regulator, seal thread tape.

EcoPlus® Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.

Premium vinyl tubing made of excellent quality. Made in the USA.

• 1 1/2 inch water hammer arrestor kit.
• Normal operating pressure - 35 to 500 psi.
• Spike pressure not to exceed 2,000 psi.

Features: stainless steel water hammer arrestor, 4-inch nipple, tee, elbow, close nipple, union, and a roll of thread seal tape.

Injection seal kit for the Dosatron® D14MZ5 - 14 GPM, D14TMZ5 - 14 GPM, and D40MZ2-40 GPM.

Includes:

• Injection sleeve o-ring.
• Check valve assembly.
• Injection stem o-ring.
• Plunger seal.

Mini maintenance kit for the Dosatron® D40MZ2 - 40 GPM.

Includes:

• Plunger seal.
• Top guide.
• Check valve cone.
• Check valve spring.
• Check valve cone o-ring.
• Dosa-Lube (Silicone).